logo
  • Emailus:

    anand.uttarkar@htmsfutom.com
  • Contact Number

    +91-9890454224
  • Request A Quote

Welcome To Metal O Ring

HTMS Futom is dedicated to produce resilient metal seals under the most stringent quality procedures. The company is also ISO9001 certified. The quality system has been audited according to ISO 9001. Computer controlled welding equipment, Helium leak test equipment, Heat treatment, 100% LP test on O Ring seal welds etc. Spring-energised metal O Ring for Internal pressure (OSI) and (OSE) for external pressure are designed for extreme low leakage at moderate pressures

Metal O Ring

Our Products

metal c ring

Metal C Ring

Metal C-Ring for Internal Pressure (CI) and External Pressure (CE) are designed for high pressure (system pressure energised). They require low bolting load and have good spring back.

high pressure seal

High Pressure Seals

The ridal c ring for axial pressure is designed to seal shaft to bore. Close tolerances for borth shaft and bore are required.

metal v ring

Metal V Ring

The Oysterseal ® is designed for maximum spring back, and as a consequence is a low load seal. Because of the low load it will only obtain a good tightness with very soft plating or coatings.

springenergised1

Springenergised Ring

Metal CS-Ring for Internal Pressure (CSI) and External Pressure (CSE) are designed for high pressure and excellent tightness performance (system pressure energised). They require high bolting load and have good spring back.

Contact Us